Reduced "Buratino" or "SolsPenk": in the Russian Federation showed robotic mini-RSSv (photo)

To spread: the Russian company "Robottechnical Injinning" has developed a new combat module, which is two metal casing with lodges for disposable jet flamethrowers. The module is intended for placement on the chassis of the ground robotic complex (NRC). Shooting can be carried out both from all "trunks" at the same time, as well as in a given order, the Russian resource BTVT. info says. The publication described the system as a "dwarf" version of the Bratino RSZV.

It is reported that the manufacturer also offers an autonomous system of operation of the system. In case of loss of radio communication between the control panel and NRC, automatic control is allegedly carried out on the basis of the obtained satellite data and data from the IMU-Xensor, as well as automatic aiming on the target. Defense Express experts drew attention to the development, noting that the photo depicts a typical land drone without anti -entertained protection.

They also suggested that the location of the starting installation in the back of the platform can create problems with stability during firing. In addition, experts noted that the new Russian NRC is not quite correct to call a reduced analogue of systems such as Bratino or Bratino or Tos-1A "Solnaceke".

The platform uses starting for disposable jet ammunition, such as Schmel grenade launchers, which significantly distinguishes it from the HSZV-Hygnets on the tank chassis, which uses 220 mm thermobaric jet shells. "In general, regardless of whether the development itself goes into production, its concept corresponds to the current trends of the NRC.